Elite Bags BLINK'S - Integral multi-position lighting system

Magnetic glow in dark flashlight.

Blink’s is the most complete lighting system since it is designed to generate multiple lighting options, among which are: upper light, position lights (front and rear), flashlight and strobe lights.

Its main mission is to accompany the rescuer, sanitary, fireman or end-user, in emergency activities in which sunlight is deficient, and in confined places where the lighting is simply zero.

Its multiple combinations of light, allow the user to configure it indicating emergency situations in which support is required, and to obtain a precise illumination focus over the victim´s intervention area.Thanks to its infinite anchoring systems, the Blink’s can be placed on the garment or uniformity of the user, in any backpack that has a MOLLE system or magnetized on any iron surface.

Features

·     14 surrounded Led lights

·     Front torch

·     Molle system tweezer

·     Strong magnet

·     Central turning axis

Available in two colours EB09.045 Light: White – red EB09.046 Light: White – blue

Specifications:

·     Colour: standard white and another colour (Red or Blue depending on the model)

·     Different flashing modes

·     Battery: Polymer lithium battery

·     Power protection: overcharge, over-discharge, over current, short circuit, super high temperature charging and discharging

·     Working temperature: -35′(- +65’C)

·     Voltage: 3.7(VDC)

·     Battery content: 3. 7V, 500mah

·     Charging time: < 3h

·     Working time: > 2h Depending on the light pattern.

·     Height resistance to dropping: 1.8m

·     Power adapter: 5V, 1 A

lnstructions:

·     Long press button more than 2 sec, the light starts working

·     When the light is on, press the button once, the pattern will change accordingly.

·     The final pattern of chose mode will be saved.

·     When the light is turned on, press button twice and the spotlight will be on.

·     Long press button more than 2 sec, it will turn off the light.

·     Charger working status: charging (red light on), a full charge (green light on).

·     When red or blue led (depending on the model) starts flashing slowly, it means the light needs to be charged.

Please read these instructions before using the product,

Do not open the light, it can only be repaired by Factory assigned people.

AII replacement parts must be provided by the original manufacture.

This product has chemical content. Please discard according to local rules.

Battery and charging

·     Please use the specified power adaptor

·     First insert the light into the charger, then insert the plug into the charger

·     Please do not charge when the temperature is lower than-35 C0or higher than +65 C0

No.: EB09.045 – White-red

No.: EB09.046 – White-blue